165 questions
Try 'make distclean' first. Here is the error code: $tools/config.py examples/cameraMakefile:38:/tools/Sdk.mk:No such file or directorymake[4]: ***No rule to make target '/tools/Sdk.mk'.Stop.make [3]:...
I'm thinking of receiving a QZSS L1S signal.About NMEA Output for SPRESENSE GNSS Positioning InformationBased on the above post, I was able to receive $QZGSV in NMEA sentence, but I cannot receive $QZ...
https://www.switch-science.com/catalog/5258/Equipped with 3-axis acceleration, 3-axis gyro, atmospheric pressure, temperature sensor add-on board BMP280BMI160 for SPRESENSEis not currently available a...
NTP time retrieval with reference to the sample rarely results in errors.Error Displayed ERROR:LTEUDP:337 sendoto() error:22The source is simple:timeClient.begin();timeClient.update();now=timeClient.g...
Can I use Sigfox Shield for Arduino in the spresense?
If you set a push button between D00 and GND and execute the code below, bStart will only be 1.Interrupts will also occur once every few times.I would like bStart to be reversed every time I press the...
In SPRESENSE SDK v2.3.0, we created two firmware with examples/fwupdate, examples/hello, and feature/usbmsc.One has not touched the source (Hello, World!) and the other has changed the display of exam...
You are trying to edit the GNSS information receiving sketch in the Presense-Arduino sample, publish the received GNSS information as a custom message, and subscribe to another node.However, $rosrun r...
Excuse me.As stated in the title, the SD card connected to the expansion board is not recognized.After connecting the SD card, I tried the following operation, but I am having trouble recognizing the ...
I tried to write a sample sketch of Sony Spresense, gnss.ino, and check the GNSS receiving operation on the serial monitor, but the characterization is broken.Do I need to change any settings?
| « | - 10 - | » |
© 2024 OneMinuteCode. All rights reserved.