sense tag

180 questions


1 answers
97 views
0
Error installing or removing the Arduino Board Manager's Presense.

I'm using Arduino 1.8.13, but I can't change or delete the version of Spresense in the board manager.Also, the board manager displays a red java.langNullPointerException at the bottom of the screen an...

2 years ago

1 answers
162 views
0
Camera Modules and Sample Codes Available in Sony Spresense

Do you have any camera modules and sample codes available for sonyspresense?As of August 20, 2018, almost no camera information has been found on the Spresense site, and the FAQ also has related headl...

2 years ago

2 answers
64 views
0
Is there a limit to the amount of traffic per request on the Spresense LTE expansion board?

I have a question about the Spresense LTE expansion board.After HTTP POSTing binary data in the Arduino IDE development environment, the following error occurred with file size of 4 kilobytes and 5 ki...

2 years ago

1 answers
87 views
0
Sony Spresense built-in app not found

I tried the examples/hello of the Presence SDK tutorial according to the instructions in the tutorial.As shown in Figure 3 of 1.4. Loading Images to the Spresense Main Board, the load was successful a...

2 years ago

1 answers
101 views
0
Make Error in SDK for Windows

Install MSYS2 and follow these steps: $tools/config.py --kernel releaseWhen you run the , you see the make[1]:*** [Makefile.unix:300:include/arch] Error 1make:*** [Makefile:308:olddefconfigkernel] Err...

2 years ago

2 answers
87 views
0
If you connect the signal from the measuring instrument directly to the resense, it will oscillate.

I'm trying to process a signal from a measuring instrument with a sprense.One of the pins is used as a GPIO to accept interruptions from a trigger signal indicating that the instrument value is ready....

2 years ago

2 answers
97 views
0
Error Running Eclipse IDE (LPC-Link 2) Debug

Error running Eclipse IDE (LPC-Link 2) debug After performing an Eclipse debug recognizes CMSIS-DAP on LPC-Link 2Error in timeoutI feel like I'm only one step away, but I've been thinking about it for...

2 years ago

1 answers
85 views
0
Information About Using UART

It is said that the Spresense body and the expansion board cannot be used at the same time because they use the same line as the UART.If I use UART on the main side of the Spresense, will I not be abl...

2 years ago

1 answers
73 views
0
Specifications for the main and expansion boards of the spresense

Does the main or expansion board of the spresense support Bluetooth?

2 years ago

1 answers
114 views
0
"Incompatible with running version of Windows" error occurs immediately when attempting to write boot loader to Spresense

I cannot use Arduino IDE to write the boot loader to Sony's Spresense.The device is also recognized, but unlike the boot loader cannot write question in another question, Arduino: 1.8.12 (Windows Stor...

2 years ago
« - 8 - »

© 2024 OneMinuteCode. All rights reserved.