165 questions
I'm trying to process a signal from a measuring instrument with a sprense.One of the pins is used as a GPIO to accept interruptions from a trigger signal indicating that the instrument value is ready....
Error running Eclipse IDE (LPC-Link 2) debug After performing an Eclipse debug recognizes CMSIS-DAP on LPC-Link 2Error in timeoutI feel like I'm only one step away, but I've been thinking about it for...
It is said that the Spresense body and the expansion board cannot be used at the same time because they use the same line as the UART.If I use UART on the main side of the Spresense, will I not be abl...
Does the main or expansion board of the spresense support Bluetooth?
I cannot use Arduino IDE to write the boot loader to Sony's Spresense.The device is also recognized, but unlike the boot loader cannot write question in another question, Arduino: 1.8.12 (Windows Stor...
Using the main board and expansion board, the SD card was recognized by the UsbMsc.ino (sample program) of the Presense Arduino IDE.However, a program that reads and writes files on an SD card causes ...
Follow the Presense SDK tutorial I made it by configuring it with a predefined configuration, but The open function was returned with an error and the positioning could not be reached.I think I overlo...
AS_SETPLAYER_OUTPUTDEVICE_I2SOUTPUT in setPlayerMode, but I2S does not output.The library is up to date.What are the possible causes?
I would like to retrieve audio data from the microphone by referring to the example sketch pcm_capture in Spresense-Arduino and send the data via Wifi.Sketch example: I understand that the following c...
I ran an image-recognition learning model created by NNC for identifying whales and oceans in arduinoide using spresense, and the response of the serial monitor on the right side of the image is -1 li...
« | - 7 - | » |
© 2024 OneMinuteCode. All rights reserved.